KEYIB-K856 High Speed and High Efficiency Machining Center

KEYIB-K856 High Speed and High Efficiency Machining Center

Maximum load: 600kg

Positioning accuracy: 0.005/300

Repetitive positioning accuracy: 0.003/300

X, y, z fast moving speed: 48/48/32m/min.

Distance from spindle nose to workbench: 310-910mm.

High rigidity, high efficiency and integral casting heightening.

Parameters

KEYIB-K856 High Speed and High Efficiency Machining Center

Maximum load: 600kg

Positioning accuracy: 0.005/300

Repetitive positioning accuracy: 0.003/300

X, y, z fast moving speed: 48/48/32m/min.

Distance from spindle nose to workbench: 310-910mm.

High rigidity, high efficiency and integral casting heightening.

产品详情

Product introduction

K-856 high-speed vertical machining center is a high-precision, high-rigidity and high-reliability medium-sized machine tool carefully built by Dongguan Keyibo Application Technology Co., Ltd. for the mold industry and product industry. This machine tool adopts high-precision wire rail and lead screw, and the machine tool has better dynamic response performance; The spindle adopts Taiwan Province Longma spindle, which can realize high-speed cutting and better cutting performance; The tool magazine adopts fully enclosed Dejie tool magazine, which has higher reliability; This machine tool is suitable for large-scale processing of complex parts such as small and medium-sized boxes, plates, plates, valves, shells and molds.

KEYIB-K856 High Speed and High Efficiency Machining Center

Maximum load: 600kg

Positioning accuracy: 0.005/300

Repetitive positioning accuracy: 0.003/300

X, y, z fast moving speed: 48/48/32m/min.

Distance from spindle nose to workbench: 310-910mm.

High rigidity, high efficiency and integral casting heightening.

Product parameter

Processing range	X-axis stroke	mm	800
	Y-axis stroke	mm	550
	Z-axis stroke	mm	600
	Distance from spindle nose to turntable disk surface	mm	110-170
	Distance from spindle center to column rail surface	mm	589
Working table	Worktable area	mm	10000*500
	Maximum bearing capacity	kg	600
	T groove	No.	5-18
Principal axis	Spindle motor power	kw	7.5
	Spindle torque	Nm	47.5
	Speed of mainshaft	rpm	12000
	Spindle taper and specification		BT40-150
	Connection mode of motor and spindle		Direct connection
Numerical control system	System		Falak 0iMF
Servo shaft	Cutting feed speed	mm/min	0-10000
	Minimum feed rate	mm	0.001
	Driving mode of XY and Z servo motors		Direct drive
	X、Y、Z Shaft motor power	KW	2.4/2.4/3.0
	X、Y、Z Shaft motor torque	nm	17/22
	X, Y、Z Servo motor speed	rpm	3000/3000/3000
	X、Y、Z Three-axis guide rail	mm	35/45/45
	X、Y、Z Triaxial screw	mm	4016/4016/4016
	X、Y、Z Fast moving speed	mm/min	48/48/48
Machine tool accuracy	Positioning accuracy (X/Y/Z)	mm	±0.005/300
Machine tool accuracy	Repetitive positioning accuracy（X/Y/Z)	mm	±0.003/300